PIAA Powersports
Mounting Brackets

SPORT/TOURING BRACKETS

  • InformationSold separately for the first time, the brackets that make up our popular Sport/Touring Kits. Stamped steel brackets are custom made to fit specific bikes. Can be used with either our 1100X, 005, 004X or 004XT lamp kits. Easy to install, guaranteed to fit.

  • Part Number74600
  • VehicleSuzuki V Strom 
Fits 1100X, 004, 005, 510, 520 and Cross Country H.I.D. lamps

  • Part Number74119
  • VehicleHonda Goldwing (GL1800) Bracket

  • Part Number74121
  • VehicleBMW K1200LT Bracket

  • Part Number74123
  • VehicleR1200RT Bracket

  • Part Number74126
  • VehicleBMW K1200RS 02+ Bracket

  • Part Number74129
  • VehicleBMW K1200RS 98-01 Bracket

  • Part Number74151
  • VehicleBMW R1150RT Bracket

  • Part Number74651
  • VehicleBMW 650GS Bracket

  • Part Number74082
  • VehicleBMW F650GS (Twin) / F800GS Bracket

  • Part Number74110
  • VehicleBMW F650GS (Twin) / F800GS Bracket

  • Part Number74652
  • VehicleBMW F650GS (Twin) / F800GS Bracket

  • Part Number74122
  • VehicleBMW R1200RT DOHC 10+ 
Fits 1100X, 004 and 005 lamps

PRE-WIRED UTV LIGHT BAR

  • InformationThe PIAA UTV light bar comes in two sizes: the M3 which takes 3 lights up to 8" in diameter, and the M4 which takes 4 lights up to 8" in diameter. Pre-wired with marine grade 14 gauge wire, pre-terminated wires with water proof bullet connectors. Powder-coated for long life, good looks and durability. Made from 1" thick wall cold rolled steel tubing and tig welded for strength. Billet aluminum mounting brackets with adjustability for different sized tubing. Can be mounted with most aftermarket roofs. PIAA lights and Heavy Duty Wire Harness sold separately. Made in the USA

  • M3 Light Bar76803
  • VehicleFits Polaris RZR. Heavy Duty Wire Harness is sold 
separately from the Light Bar

  • M4 Light Bar76801
  • VehicleFits Ranger, Rhino and Teryx or any UTV roll bar up to 1.75" in diameter. Heavy Duty Wire Harness is sold separately from the Light Bar

HEAVY DUTY WIRE HARNESS

  • InformationThe PIAA Heavy Duty Wire Harness can save lots of time when it comes to hooking up your lights to the PIAA Pre-Wired Light Bar. Designed to easily plug into either the M3 or M4 PIAA Light Bar, the Heavy Duty Wire Harness includes a heavy duty 40 amp relay and switch with more than enough capacity to run 3 or 4 lights on the same circuit. Although it is designed to plug into the leads from our light bar, our light bar harness can be used for other electrical projects as well. Heavy Duty Wire Harness is sold separately from the Pre-Wired Light Bar.

  • Part Number78900

360 X 4 UNIVERSAL BRACKET

  • InformationOur single clamp system with infinite adjustability, redefines universal! The new 360 x 4 Universal Bracket is named for the fact that the light mounting base can be rotated 360 and fits 4 different bar sizes. Mount lights to any bar from 7/8 inch utility ATV bars to a 1-1/4 inch motorcycle engine guard. Can also be used for 1 inch or 1-1/8 inch handle bars. Simply slip in one of the three inserts provided and you have the size you need. With 360 adjustability you can mount lights onto just about any angle bar on whatever vehicle you own. Machined from solid billet aluminum for strength and powder-coated for rugged wear and long life.

  • Part Number74000

1200GS LIGHT BAR

  • InformationThe PIAA R1200GS Light Bar is designed to install PIAA lights on all BMW R1200GS bikes including the Adventure models. Made from 6061-T6 billet aluminum it is both light weight and strong. An easy to install mounting bracket attaches the bar to the frame in a secure location under the front fender. Each end is threaded to accept a 10mm bolt which makes it the perfect location to mount a second PIAA lamp. (We recommend the PIAA 1100X.) With its anodized black finish, the PIAA Light Bar will add both function and beauty to your R1200GS.

  • Part Number74202

L-BRACKET BAR CLAMP

  • InformationThese PIAA L-Brackets are lightweight, strong, easy-to-install and attractive. These brackets are made to mount practically any PIAA light to anywhere you have a bar. Available in multiple sizes and in black or chrome.

  • 7/8" Twin Pack Black74111
  • 1" Twin Pack Black74112
  • 1-1/8"" Twin Pack Black74114
  • 1-1/2"" Twin Pack Black74116
  • 1-3/4"" Twin Pack Black74117
  • InformationPIAA Cruiser L-Brackets will mount PIAA lights and other accessories to your 1.25” engine guard with style. All billet aluminum chrome brackets can be adjusted to compensate for bends and angles on your engine bar. We recommend using with the PIAA P-1000 or 005 model lights for a clean and modern chrome look that is both beautiful and functional.

  • 1-1/4"" Twin Pack Chrome74115

GOLDWING MIRROR MOUNT

  • InformationIt’s not easy to mount a good set of auxiliary lights to a GL1800 Goldwing, but PIAA changes that with their new Mirror Mount Bracket. Easy to install, the bracket uses the same “footprint” as the mirror so that most of the bracket is practically invisible. The PIAA Goldwing Mirror Mount Bracket allows for easy installation of just about any of your favorite PIAA lights.

  • Part Number74181

UNIVERSAL MOUNTING BRACKET

  • InformationEasily install PIAA auxiliary lights with our Universal Mounting Bracket. Designed for the larger ATV’s and Side x Side’s which use larger diameter tubing. Designed to fit both 1-1/2” and 1-3/4” bars.

  • Twin Pack74102