PIAA Powersports
Accessories

SPORTS HORN

  • InformationA loud, attention getting horn is one of your most important safety devices. make sure people notice you with this 115db 500Hz lightweight and easy to install horn from PIAA.
  • Kit Part Number76500
  • Kit Includesone (1) 500Hz horn and installation instructions. No wiring harness is required.

HIGH INTENSITY LED LAMPS

  • InformationHigh-output LED lamps can be used as rear fog or additional tail lights providing greater visibility for vehicles coming up from behind. They are easy to install and available in a single or double row of super bright LED lights.

  • StyleDÉNO-3 RED REAR FOG LED
  • Single Lamp Kit PN72553
  • Kit IncludesTwelve LEDs are aligned horizontally in a clear reflector compartment.

  • StyleDÉNO-1 RED REAR FOG LED
  • Single Lamp Kit PN72551
  • Kit IncludesSix LEDs are aligned horizontally in a clear reflector compartment.

PIAA LENS PROTECTION

  • InformationExtremely durable and impact-resistant, this self-adhesive, transparent lens protection is second to none. With a special formulated vinyl, the PIAA Lens Protection is over 1/16” thick, optically clear and race-tested to over 160mph. each pre-cut lamp application is highly transparent and will not alter the performance of the lens. Simply peel off backing and apply to lens.

  • Kit PN79510
  • Fits PIAA Lamps510 4"

  • Kit PN79601
  • Fits PIAA Lamps540 & 600 H.I.D. 5"

  • Kit PN79520
  • Fits PIAA Lamps520 6"

CROSS COUNTRY H.I.D. COVERS

  • InformationThese plastic covers easily slip over the front of your PIAA Cross Country H.I.D. lamps to protect them from road hazards and can be used when the lights are on. Easily change from a white light to an amber light with the amber covers to become more visible, especially during the day.

  • StyleClear
  • Kit PN76082

  • StyleAmber
  • Kit PN76083

PIAA EXTENSION HARNESS

  • InformationLarger ATV’s and Side x Side’s are requiring a longer light harness than normal. The 80” extension was designed for mounting lights on the factory brush guard of a Yamaha Rhino, and the 130” extension was designed for use when mounting on the overhead bars. These harnesses are equipped with bullet style connectors for quick plug-in installation.

  • Style130”
  • Kit PN74431

  • Style80”
  • Kit PN74481