PIAA | RF3 LED Cube Wins Media Award

by | | 0 comment(s)

*|MC:SUBJECT|*

PIAA | RF3 LED Cube Wins Media Award
View this email in your browser
The showing of the new RF3 LED cube light was a big hit at this years SEMA show. Selected by a panel of media judges, the RF3 LED cube light was chosen based on consumer appeal.

The RF3 LED light features Reflector-
Facing
Technology that allows for precise beam control and puts light where the driver needs it most. The reflector facing LEDs 

project off of an ingenious computer-designed multi-surface reflector offering more illumination than forward facing LED lights. The RF3 kit includes two lights, mounting brackets, and pre-assembled wiring harness and detailed installation instructions. Its compact size allows the lights to fit almost anywhere and be used for virtually any application. 

Product Specs:
Housing Material: Die Cast Aluminum For Strength 
Lens: High Strength PC For Durability
Kelvin: 6000k To Replicate Daylight
DRV Candela/Lumens: 47800Cd
Flood Candela/Lumens: 4640Cd
Vibration Rating: 10g To Withstand The Most Rugged Terrain 
Water/Dust Proof: IP67
Wattage: 2x8=16w That Provides More Light Output And Less Draw
Chip Type: CREE XML2
Compliance : SAE Standard J581 for Street Legality
Beam: DRV 30° | Flood 70°
Availability: Early 2015
In an effort to show the extreme benefits of our Reflector Facing Technology (RFT), we invested in a brand new SEMA booth which included a light viewing room to put our LED lights up against the competition and allow the consumers to decide for themselves which lights would reign supreme.

The outcome was clear, and effectively showed the value of our Reflector Facing  LED technology. When designing the RF3 light, a major focus point was to maximize light output while maintaining a true beam pattern to make the light SAE compliant. 
For more information contact:

Justin MacLauchlan
Brand Manager
503-489-6666 x 2080
justin.maclauchlan@piaa.com
www.piaa.com
 
This entry was posted in no categories.
0

Comments

Add a Comment to this Post
You must be logged in to post comments.